Fujitsu PRIMEQUEST 1000 Series Tool Reference page 448

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
Item
Virtualization Technology (VT-x) Specifies Enabled or Disabled for the CPU virtualization support
Virtualization Technology (VT-d) Specifies Enabled or Disabled for the chip set virtualization support
Adjacent Cache Line Prefetch
Hardware Prefetch
x2APIC Mode
Commit Changes and Exit
Discard Changes and Exit
(3) Help display area for menu selection
The display of the contents outlined in
selection depends on the cursor position.
Displayed contents
function.
- Enabled
- Disabled
The default is [Enabled].
function.
- Enabled
- Disabled
The default is [Enabled].
Specifies Enabled or Disabled for the function for fetching adjacent
data when fetching the target data from memory to the L2 cache line.
- Enabled
- Disabled
The default is [Enabled].
Specifies <Enabled> or <Disabled> for the function for prefetching the
subsequent data from memory to the L2 cache when the CPU detects
a continuous access pattern to data with an equal interval in memory.
- Enabled
- Disabled
The default is [Enabled].
[PRIMEQUEST 1800E2 only]
Specifies Enabled or Disabled for x2APIC Mode.
For operating systems that support x2APIC, specify [Enabled].
For operating systems that do not support x2APIC, specify [Disabled].
- Enabled
- Disabled
The default is [Enabled].
Remarks
For details on x2APIC support of each operating system, see G.1
CPU in the PRIMEQUEST 1000 Series Administration Manual (C122-
E108EN).
Saves the changes to settings and exits this menu.
Cancels the changes to settings and exits this menu.
TABLE 5.23 Displayed contents of the help display area for menu
416 C122-E110-10EN