PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
1.6
[Maintenance] Menu
You can perform maintenance on the PRIMEQUEST 1000 series server from the [Maintenance] menu.
1.6.1
[Firmware Update] menu
The [Firmware Update] menu has the following window:
[Unified Firmware Update] window
[Unified Firmware Update] window
You can unify a firmware update in the [Unified Firmware Update] window.
This window uploads a set of firmware onto the MMB. Two generations (new and old versions) of the firmware
are retained.
Confirm the version of each firmware. Update the firmware only if those versions are not the same.
Note
If the MMB or SB has failed, perform maintenance on it before updating the firmware. Do not update the firmware
in a configuration that has a faulty MMB or SB.
FIGURE 1.78 [Unified Firmware Update] window
(1) Menu operations
[Maintenance] - [Firmware Update] - [Unified Firmware Update]
(2) Window operations
1. Click the [Browse...] button to select a unified firmware update file.
2. Click the [Update] button.
This displays the window for confirming the versions for the unified firmware update.
3. To perform the update, click the [OK] button.
204
C122-E110-10EN