Web-Ui Window View; Network Set Up Of Mmb; Table 3.7 Default User Account/Password - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
Username
Password
● Logout
Click [Logout] on the Navigation Bar.
→ Log out from Web-UI.

3.3.5 Web-UI Window View

For details on Web-UI window view, see "Chapter 1 Web-UI Overview" of PRIMEQUEST 2000 Series User Interface
Operating Instructions (CA92344-0538)
Remark
When [Read Error] is displayed on Web-UI Window, confirm the contents by referring to "11.2Troubleshooting" of
PRIMEQUEST 2000 series Administration Manual (CA92344-0537). In spite of referring to the manual, if the error cannot
be resolved, recurs, contact repairs inquiry counter or a sales representative.
Before making contact, confirm the model name and serial number shown on the label on the device and communicate the
same.
Basic operations in MMB Web-UI
The flow of basic operations is as follows.
1. The Menu is selected from Navigation Bar.
 The Submenu of the selected menu is displayed in the submenu area.
2. The Menu is selected from the submenu.
 The window corresponding to the selected menu is displayed in the content area.
3. Information displayed on the window is confirmed and set.
When [Apply] Button is clicked, the information is set.
When [Cancel] Button is clicked, the information returns to the previous status.
Note
When Internet Explorer is being used, if the display of dialog box for confirmation of process execution, or the display of
dialog box or for notification of process completion exceeds 2 minute or more, its connection with MMB Web-UI is cut. In
this case, login again to MMB Web-UI.

3.3.6 Network set up of MMB

MMB Network is set up. For the items already set at this time, confirm the setting contents. For the items not set, make the
settings.
Following IP Addresses are set.
- Virtual IP Address used to access Web-UI
- Physical IP Address assigned to the MMB interface.
See "3.6 Storage of the configuration
Note
- Set up of MMB Physical IP Address is not required, as long as MMB is not mounted at the installation location
MMB#1, and PRIMECLUSTER linkage is not performed.
- Log in to 'Administrator privileges, to set up MMB network.
- When on [Network Interface] window, if [Apply] Button is clicked after changing [MMB#0 IP Address] or [MMB#1 IP
Address]:
To reflect the settings, the network is temporarily stopped, and Web-UI is cut. It is possible to connect to Web-UI again
by selecting Web-UI menu.
- When Virtual IP Address is changed:
Connection with MMB Web-UI is cut. Re-login is required when MMB Web-UI is to be used.

TABLE 3.7 Default user account/password

Administrator
Password set up by the field engineer when setting a device
information" for the backup of information which is set
18
CA92344-0536-04