Fujitsu PRIMEQUEST 1000 Series Tool Reference page 199

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Item
MMB#1 IP Address Sets the physical IP address assigned to the MMB#1 interface.
This item is available only if the system has MMB#1.
You cannot access the Web-UI from this interface.
Unless MMB#1 is mounted, this window does not display the [MMB#1 IP Address] table.
Host Name (optional) Sets the host name in FQDN format.
You can enter the following characters:
[a-z], [A-Z], [0-9], - (hyphen), . (period).
Only the above characters can be specified.
Also, the following restrictions apply:
The default is "PRIMEQUEST" + "." + Product Serial Number.
For example, if the serial number is 1020516004, the character string is
"PRIMEQUEST1020516004".
Remarks
The setting in FQDN format is not required if you are not operating on the domain.
IP Address Sets the IP address.
Subnet Mask Sets the subnet mask.
Gateway address Sets the gateway IP address.
DNS Sets whether to use the DNS server.
To use the DNS, select Enable.
The default is Disable.
DNS Server 1 Sets the IP address of the Primary DNS server.
DNS Server 2 Sets the IP address of the Secondary DNS server.
DNS Server 3 Sets the IP address of the Third DNS server.
Management LAN
Dualization Duplicates the management LAN.
The default is Disable.
Maintenance IP Address
IP Address Sets the IP address.
Subnet Mask Sets the subnet mask.
Gateway address Sets the gateway IP address.
SMTP address Sets the SMTP IP address.
MMB-PSA IP Address
IP Address Used to enter the IP address for communication between the MMB and PSA. For details,
see Chapter 5 Work after Operating System Installation (PRIMEQUEST 1800E2) or
- The character string must begin with an alphabetic character.
- The character string cannot begin or end with the following character specified: -
(hyphen) or . (period).
167
Description
C122-E110-10EN