Figure 3.7 [Ethernet Controller] Window (Progress Bar Displayed); Table 3.11 Display And Setting Items In The [Ethernet Controller] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 3 PSA Web-UI (Web User Interface) Operations
For a partition containing many network interfaces, the [Ethernet Controller] window displays a progress bar (as
information acquisition takes about 20 seconds or more).

FIGURE 3.7 [Ethernet Controller] window (progress bar displayed)

TABLE 3.11 Display and setting items in the [Ethernet Controller] window

Item
PCI Device Information
Unit Displays the Ethernet controller identifier.
Status Displays the status of the Ethernet controller.
If the status is [Error] or [Warning], the window displays a check box.
After checking the check box, click the [Status Clear] button to clear the status.
Device Name Displays the vendor name together with the device name as the name of the device.
In Windows, immediately after a hardware configuration change, a newly added device
is displayed as [Ethernet Controller]. After about 30 minutes, it is replaced with the device
name recognized by the OS.
Device Class (hex) Displays the device class ID (in hexadecimal).
Seg/Bus/Dev/Func Displays the following numbers:
- OK: Operating normally
- Error: Serious problem such as a hardware failure
- Warning: Warning status (potential problem in the future)
- Unknown: Unknown
- Segment number
- Bus number
- Device number
299
Description
C122-E110-10EN