Table of Contents
Advertisement
Programs
You can register frequently used set-
tings in the machine memory and re-
call them for future use.
Note
❒ You can register up to 10 programs
for the scanner mode.
❒ You can use the settings registered
in program No.10 as the initial
mode by selecting [Program No.10]
in [Change Initial Mode] of [Scanner
Features].
❒ Programs are not deleted by turn-
ing the power off or by pressing
the {Clear Modes} key. They are de-
leted only when you delete them
or overwrite them with another
program.
❒ The setting which can be registered
in a program are as follows: the
scan settings, 1 sided/2 sided orig-
inal, Top to Top/Top to Bottom,
Last Page, Divide, Original Feed
Type, File Type, Batch/SADF, and
Stamp.
Registering a Program
A
Make the settings you want to
register in the initial display of
the scanner mode.
B
Press the {Program} key.
C
Press [m Register].
D
Press the program number you
want to register.
Note
❒ Program numbers with m al-
ready have settings in them.
E
Enter the program name with the
soft keyboard that appears on the
display panel.
Note
❒ You can enter up to 40 charac-
ters.
❒ If it is not necessary to enter the
program name, proceed to step
F
.
F
Press [OK].
When the settings are successfully
registered, m appears on the left
side of the registered program
AHV001S
number and the program name ap-
pears on the right side. The display
returns to the initial display after a
moment.
Programs
7
85
Advertisement
Table of Contents
