Table of Contents
Advertisement
1. Channel Section
The signal fed through an input socket goes to a
balance
amplifier.
then
to
a head
amplifier,
and
finally, its input sensitivity is adjusted at the Sens
Contre! Knob.
When signa! is input, the Peak/Signai
Indicator lights in green.
If the level of the input
signal is toc high, the indicator changes to red.
2. Master Section
a. Return
The signals fed into Returns 1 — 4 enter the buffer
amplifier, and after passing through Return Volume
and being mixed, are passed to the Master Out.
b. Rec Out
c. Master Out
Signals
coming
from
the channels
are mixed and
level-adjusted at the Master Fader, then sent to the
Master Out.
d. Effect Send
Signals coming from the Effect Volumes are mixed,
and level-adjusted at the Effect Send Volume, then
sent to the Effect Send.
e. AUX Send
f. Monitor Send
g. Cue Send
The
signal
sent
from
the Cue
Switch
is mixed,
level-adjusted
at the Headphone/Cue
Volume
then
sent to the Headphone Socket and Cue Send.
h. Bus In
The signals coming from the Bus In Sockets(L and R)
are directly sent to the mixing circuits to be mixed,
sent to the Master Fader, then finally to the Master
Out.
Advertisement
Table of Contents
