Fader Module Section; Layer Section - Roland RSS M-300 Owner's Manual

Fader module section

1
fig.FaderModSectGuide.eps
1
2
3
4
5
This section lets you control the

Layer section.

SEL buttons
1
Use these buttons to select the channel that you want to
control in the CHANNEL EDIT section or in the screen. The
[SEL] button of the currently selected channel will light.
SOLO buttons
2
These buttons turn solo on/off for each channel. The button
will light when solo is on.
"Using Solo" (p. 115)
Meters
3
These indicate the signal level of each channel.
"Editing the meter settings" (p. 96)
MUTE buttons
4
These turn muting on/off for each channel. The button will
be lit if mute is active.
Faders
5
These adjust the signal level of each channel.
16 channels you selected in the
Explanation of the panels
LAYER section
2
fig.LayerSectGuide.eps
1
2
3
4
5
This section lets you select the channel layer that will be assigned
to the fader module section. The button of the currently assigned
channel layer will be lit.
USER1 layer button
1
USER2 layer button
2
This assigns the user fader layer 1 or user fader layer 2 to the
fader module section.
"Editing the user fader layers" (p. 134)
AUX/MTX/DCA layer button
3
This assigns AUX1–8, MTX1–4, and
module section.
CH 17–32 layer button
4
This assigns CH17–32 to the fader module section
CH 1–16 layer button
5
This assigns CH1–16 to the fader module section.
DCA1–4 to the fader
21