Ip Filter - Fujitsu PRIMERGY BX900 User Manual

9.4.8

IP Filter

9.4.8.1 Config
Management IP filter designates stations that are allowed to make configuration changes to the Switch.
Select up to five IPv4 and five IPv6 management stations used to manage the Switch. If you choose to
define one or more designated management stations, only the chosen stations, as defined by IPv4/IPv6
address, will be allowed management privilege through the web manager, Telnet session, Secure Shell
(SSH) or Secure Socket Layer (SSL) for secure HTTP.
Figure : IP Filter Config
Selection Criteria
Admin Mode - Selects the IP Filter admin mode for enable or disable.
IP Filter - You can use this screen to reconfigure an existing IP Filter, or to create a new one. Use
this pulldown menu to select one of the existing IP Filter Names, or select 'Create' to add a new one.
Protocol - Select IPv4 or IPv6 to configure the corresponding attributes.
Configurable Data
IP Filter Name - The IP Filter Name, it identifies each IP Filter. IP Filter name in the IP Filter must be
unique. A valid entry is a case-sensitive string of up to 64 characters.
Client IP Address - Taken together, the Client IP Address and Client IP Mask denote a range of IP
addresses from which clients may access this device. Every client's IP address is ANDed with the
mask, as is the Client IP Address, and, if the values are equal, access is allowed. For example, if the
Client IP Address and Client IP Mask parameters are 192.168.1.0/255.255.255.0, then any client
whose IP address is 192.168.1.0 through 192.168.1.255 (inclusive) will be allowed access. To allow
access from only one station, use a Client IP Mask value of 255.255.255.255, and use that
machine's IP address for Client IP Address.
Client IP Mask - Taken together, the Client IP Address and Client IP Mask denote a range of IP
addresses from which clients may use access this device. Every client's IP address is ANDed with
the mask, as is the Client IP Address, and, if the values are equal, access is allowed. For example, if
the Client IP Address and Client IP Mask parameters are 192.168.1.0/255.255.255.0, then any client
2011 Fujitsu Technology Solutions
©
315