Fujitsu PRIMERGY BX900 User Manual page 172

9.2.14.5 Hosts Config
You can use this screen to change the configuration parameters for the static entry in the DNS table.
You can also use this screen to display the contents of the table.
Figure : DNS Relay Hosts Config
Selection Criteria
Protocol – Specify the IP version, IPv4 or IPv6.
Domain - Specifies all the existing hosts along with an additional option "Create". When the user
selects "Create" another text box "Domain Name" appears where the user may enter host to be
configured.
Configurable Data
Domain Name - Specifies the domain name of the host. This is a text string of up to 63 characters.
IP Address - Specifies the IPv4/IPv6 address of the host.
Command Buttons
Apply - Sends the updated configuration to the switch. Configuration changes take effect
immediately.
Delete - Deletes the host entry. Sends the updated configuration to the switch. Configuration
changes take effect immediately.
Delete All - Deletes all the host entries. Sends the updated configuration to the switch. Configuration
changes take effect immediately.
2011 Fujitsu Technology Solutions
©
170