Fujitsu PRIMERGY BX900 User Manual page 309

IP Precedence Configuration
The IP Precedence field in a packet is defined as the high-order three bits of the Service
Type octet in the IP header. This is an optional configuration. Enter an integer from 0 to 7.
IP TOS Configuration
The IP TOS field in a packet is defined as all eight bits of the Service Type octet in the IP
header. The TOS Bits value is a hexadecimal number from 00 to FF. The TOS Mask value is
a hexadecimal number from 00 to FF. The TOS Mask denotes the bit positions in the TOS
Bits value that are used for comparison against the IP TOS field in a packet. For example, to
check for an IP TOS value having bits 7 and 5 set and bit 1 clear, where bit 7 is most
significant, use a TOS Bits value of 0xA0 and a TOS Mask of 0xFF. This is an optional
configuration.
Command Buttons
Configure - Configure the corresponding match criteria for the selected rule.
Delete - Remove the currently selected Rule from the selected ACL. These changes will not be
retained across a power cycle unless a save configuration is performed.
2011 Fujitsu Technology Solutions
©
307