Fujitsu PRIMERGY BX900 User Manual page 374

10.4.1.7 negotiate
This command enables automatic negotiation on a port. The default value is enabled.
Syntax
negotiate
no negotiate
no - This command disables automatic negotiation on a port.
Default Setting
Enable
Command Mode
Interface Config
This command enables automatic negotiation on all interfaces. The default value is enabled.
Syntax
negotiate all
no negotiate all
all - This command represents all interfaces.
no - This command disables automatic negotiation on all interfaces.
Default Setting
Enable
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
372