Fujitsu PRIMERGY BX900 User Manual page 500

10.6.1.3 show ip filter
This command displays management IP filter status and all designated management stations.
Syntax
show ip filter
Default Setting
None
Command Mode
Privileged Exec
Display Message
Name: The name of IPv4/IPv6 stations.
IP Address/Prefix: The IPv4 address and IPv6 Prefix of stations that are allowed to make
configuration changes to the Switch.
IP Mask/Prefix Length: The IPv4 mask address and IPv6 Prefix length of stations that are allowed
to make configuration changes to the Switch.
10.6.1.4 mtu
This command sets the maximum transmission unit (MTU) size (in bytes) for physical and port-channel
(LAG) interfaces. For the standard implementation, the range of <1518-9216> is a valid integer between
1518-9216.
Syntax
mtu <1518-9216>
no mtu
<1518-9216> - Max frame size (Range: 1518 - 9216).
no - This command sets the default maximum transmission unit (MTU) size (in bytes) for the
interface.
Default Setting
1518
Command Mode
Interface Config
2011 Fujitsu Technology Solutions
©
498