Fujitsu PRIMERGY BX900 User Manual page 92

Blade server systems ethernet connection blade module sb6 / sb11a / sb11 switch version

Hide thumbs Also See for PRIMERGY BX900:

Table of Contents

Figure : HTTP Config

Configurable Data

HTTP Session Soft Timeout - This field is used to set the inactivity timeout for HTTP sessions. The

value must be in the range of (0 to 60) minutes. A value of zero corresponds to an infinite timeout.

The default value is 15 minutes. The currently configured value is shown when the web page is

HTTP Session Hard Timeout - This field is used to set the hard timeout for HTTP sessions. This

timeout is unaffected by the activity level of the session. The value must be in the range of (0 to 168)

hours. A value of zero corresponds to an infinite timeout. The default value is 24 hours. The currently

configured value is shown when the web page is displayed.

Maximum Number of HTTP Sessions - This field is used to set the maximum allowable number of

HTTP sessions. The value must be in the range of (0 to 16). The default value is 16. The currently

configured value is shown when the web page is displayed.

Command Buttons

Apply - Send the updated screen to the switch. Changes take effect on the switch but these

changes will not be retained across a power cycle unless a save is performed.

2011 Fujitsu Technology Solutions

Show Quick Links

Table of Contents

Primergy bx400