Authorization List Name - If you are creating a new login list, enter the name you want to assign. It
can be up to 15 alphanumeric characters long and is not case sensitive.
Command Buttons
Apply - Send the updated screen to the switch and cause the changes to take effect on the switch.
These changes will not be retained across a power cycle unless you perform a save.
Delete - Remove the selected authorization login list from the configuration. The delete will fail if the
selected login list is assigned to any user (including the default user) for system login or IEEE 802.1x
port access control. You can only use this button if you have Read/Write access. The change will not
be retained across a power cycle unless you perform a save.
2011 Fujitsu Technology Solutions
106
©