Fujitsu PRIMERGY BX900 User Manual page 675

10.11.2.3 username snmpv3 encryption
This command specifies the encryption protocol and key to be used for the specified login user. The valid
encryption protocols are none or des. The des protocol requires a key, which can be specified on the
command line. The key may be up to 16 characters. If the des protocol is specified but a key is not
provided, the user will be prompted to enter the key. If none is specified, a key must not be provided. The
<username> is the login user name for which the specified encryption protocol will be used.
Syntax
username snmpv3 encryption <username> {none | des <0|7> <key>}
no username snmpv3 encryption <username>
<username> - is the login user name.
des - des encryption protocol.
none - no encryption protocol.
no - This command sets the encryption protocol to none. The <username> is the login user name for
which the specified encryption protocol will be used.
Default Setting
No encryption
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
673