Fujitsu PRIMERGY BX900 User Manual page 513

10.6.2.9 show pager
This command displays pager settings.
Syntax
show pager
Default Setting
None
Command Mode
Privileged Exec
10.6.2.10 pager
This command is used to enable/disable pager mode. If the pager mode is enabled, the displayed data
on terminal will be displayed one page at a time.
Syntax
pager
no pager
no - This command sets pager mode to disable.
Default Setting
Enable
Command Mode
Privileged Exec
2011 Fujitsu Technology Solutions
©
511