Fujitsu PRIMERGY BX900 User Manual page 694

10.15.2.3 sntp client port
This command will set the SNTP client port id and polling interval in seconds.
Syntax
sntp client port <portid>
no sntp client port
<portid> - SNTP client port id, 1 - 65536.
Default Setting
The default port id is 123.
Command Mode
Global Config
10.15.2.4 sntp unicast client poll-interval
This command will set the poll interval for SNTP unicast clients in seconds.
Syntax
sntp unicast client poll-interval <poll-interval>
no sntp unicast client poll-interval
<poll-interval> - Polling interval. It's 2^(value) seconds where value is 6 to 10.
no - This command will reset the poll interval for SNTP unicast clients to its default value.
Default Setting
The default value is 6.
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
692