Notes On Air Filter - Fujitsu SPARC Enterprise M3000 Product Notes

RCI and APCS Control with Mode Switch
TABLE 5-1
Function Mode Switch
Locked
RCI Remote power-on/power-off
operations are enabled.
APCS Automatic power-on/power-off
operations are enabled.
To use the RCI function, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers RCI Build Procedure and the SPARC
Enterprise M3000/M4000/M5000/M8000/M9000 Servers RCI User's Guide.
To use the APCS, see the Enhanced Support Facility User's Guide for Machine
Administration Automatic Power Control Function (Supplement Edition).

Notes on Air Filter

Fujitsu does not handle the air filter which is shown in the SPARC Enterprise
M4000/M5000 Servers Service Manual as a product.
Limitation for 1027A-Z/X1027A-Z
For PCIe Dual 10 Gigabit Ethernet Fiber XFP Low Profile Adapter (1027A-Z/
X1027A-Z), these maximum limits apply:
No more than two cards per a domain in an M4000 server.
■
No more than four cards per a domain in an M5000 server.
■
Do not use these cards in an External I/O Expansion Unit.
■
Limitation for 4447A-Z/X4447A-Z
For PCIe Quad-port Gigabit Ethernet UTP Low Profile Adapter (4447A-Z/
X4447A-Z), these maximum limits apply:
No more than four cards per a domain in an M4000 server.
■
No more than eight cards per a domain in an M5000 server.
■
Chapter 5 Information About Hardware of M4000/M5000 Servers
Service
Remote power-on/power-off
operations are disabled.
Automatic power-on is disabled, but
power-off remains enabled.
109