9.2.2.5
Telnet Client Config
Figure : Telnet Client Config
Selection Criteria
Admin Mode - Specifies if the Outbound Telnet service is Enabled or Disabled. Default value is
Enabled.
Maximum Sessions - Specifies the maximum number of Outbound Telnet Sessions allowed.
Default value is 5. Valid Range is (0 to 5).
Configurable Data
Session Timeout - Specifies the Outbound Telnet login inactivity timeout. Default value is 5. Valid
Range is (1 to 160).
Terminal Length - Specify the max scroll line of console
Command Buttons
Apply - Sends the updated configuration to the switch. Configuration changes take effect
immediately.
2011 Fujitsu Technology Solutions
©
86