Fujitsu PRIMERGY BX900 User Manual page 455

Group Membership Interval: Shows the amount of time in seconds that a switch will wait for a
report from a particular group on a particular interface, which is participating in the VLAN, before
deleting the interface from the entry. This value may be configured.
Max Response Time: VLANs on which MLD Snooping is enabled
Multicast Router Present Expiration Time: Displays the amount of time to wait before
removing an interface that is participating in the VLAN from the list of interfaces with multicast
routers attached. The interface is removed if a query is not received. This value may be
configured.
10.4.8.1.2 show ipv6 mld snooping mrouter interface
The user can go to the CLI Privilege Mode to display information about statically configured multicast
router-attached, use the show ipv6 mld snooping mrouter Privilege command.
Syntax
show ipv6 mld snooping mrouter
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
Interface: Shows the interface on which multicast router information is being displayed.
Multicast Router Attached: Indicates whether multicast router is statically enabled on the interface.
VLAN ID: Displays the list of VLANs of which the interface is a member.
2011 Fujitsu Technology Solutions
©
453