Fujitsu PRIMERGY BX900 User Manual page 426

This command sets how frequently Leave All PDUs are generated per port. A Leave All PDU indicates
that all registrations will be unregistered. Participants would need to rejoin in order to maintain
registration. The value applies per port and per GARP participation. The time may range from 200 to
6000 (centiseconds).
Syntax
garp timer leaveall < 200-6000 >
no garp timer leaveall
<200-6000> - leave time (Range: 200 – 6000) in centiseconds.
no - This command sets how frequently Leave All PDUs are generated per port to 1000
centiseconds (10 seconds).
This command has an effect only when GVRP or GMRP is enabled.
i
Default Setting
1000 centiseconds (10 seconds)
Command Mode
Interface Config
2011 Fujitsu Technology Solutions
©
424