Fujitsu PRIMERGY BX900 User Manual page 189

9.3.2.2 Summary
This screen displays the status for all ports in the switch.
Figure : Port Summary
Selection Criteria
MST ID - Select the Multiple Spanning Tree instance ID from the list of all currently configured MST
ID's to determine the values displayed for the Spanning Tree parameters. Changing the selected
MST ID will generate a screen refresh. If Spanning Tree is disabled this will be a static value, CST,
instead of a selector.
Non-Configurable Port Status Data
Unit/Slot/Port - Identifies the port
Port Type - For normal ports this field will be blank. Otherwise the possible values are:
Source - the port is a monitoring port. Look at the Port Monitoring screens for more
information.
Destination - the port is a monitoring port. Look at the Port Monitoring screens for more
information.
Port Channel - the port is a member of a Link Aggregation trunk. Look at the LAG screens for
more information.
STP Mode - The Spanning Tree Protocol Administrative Mode associated with the port or LAG. The
possible values are:
Enable - spanning tree is enabled for this port.
Disable - spanning tree is disabled for this port.
2011 Fujitsu Technology Solutions
©
187