10.6.3.6
password-threshold
This command is used to set the password instruction threshold limited for the number of failed login
attempts.
Syntax
password-threshold <0-120>
no password-threshold
<threshold> - max threshold (Range: 0 - 120).
no - This command sets the maximum value to the default.
Default Setting
3
Command Mode
Line Vty
10.6.3.7
maxsessions
This command specifies the maximum number of remote connection sessions that can be established. A
value of 0 indicates that no remote connection can be established. The range is 0 to 5.
Syntax
maxsessions <0-5>
no maxsessions
<0-5> - max sessions (Range: 0 - 5).
no - This command sets the maximum value to be 5.
Default Setting
5
Command Mode
Line Vty
2011 Fujitsu Technology Solutions
©
516