Fujitsu PRIMERGY BX900 User Manual page 132

9.2.8.2 SNMP User Config
This menu will display an entry for every SNMP user.
Figure : SNMP User Config
Selection Criteria
User - You can use this screen to reconfigure an existing SNMP user, or to create a new one. Use
this pulldown menu to select one of the existing SNMP user, or select 'Create' to add a new one.
Authentication Protocol - Specify the SNMPv3 Authentication Protocol setting for the selected user
account. The valid Authentication Protocols are None, MD5 or SHA.
Encryption Protocol - Specify the SNMPv3 Encryption Protocl setting for the selected user
account. The valid Encryption Protocol are None or DES.
Configurable Data
User Name - Enter SNMP user name you want to create. (You can only enter data in this field when
you are creating a new account.) User names are up to 8 characters in length and are case
insensitive. Valid characters include all alphanumeric characters as well as the dash ('-') and
underscore ('_') characters.
Authentication Passowrd - Enter new or changed password for the authentication protocol for this
SNMP user. Passwords are up to eight alphanumeric characters in length and are case sensitive.
Encryption Password - Enter new or changed password for the encryption protocol for this SNMP
user. Passwords are up to 64 alphanumeric characters in length and are case sensitive.
Command Buttons
Apply - Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
Delete - Delete the currently selected SNMP User. If you want the switch to retain the new values
across a power cycle, you must perform a save.
2011 Fujitsu Technology Solutions
©
130