Fujitsu PRIMERGY BX900 User Manual page 688

This command is to Enable/Disable a port-backup group support the mac-move-update or change
failback-time value. Use 'port-backup group <group id> [failback-time <value>| mac-move-update] or no
command to disable a group.
Syntax
port-backup group <group id> [failback-time <value>| mac-move-update]
no port-backup group <group id> [failback-time <value>| mac-move-update]
<group id> - port backup group id (Range: 1~32).
<value> - The 0 indicate disable failback time. Time value is range from 1 to 60 seconds. Default value
is 60 seconds.
no - This command destroy a port backup group.
Default Setting
failback-time is 60
mac-move-update is disabled
Command Mode
Global Config
This command is to Enable/Disable a port-backup group. Use 'port-backup group enable <group id> to
enable individual group, and use no command to disable a group.
Syntax
port-backup group enable <group id>
no port-backup group enable <group id>
<group id> - port backup group id (Range: 1~32).
no - This command disables port backup group.
Default Setting
Disable
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
686