Fujitsu PRIMERGY BX900 User Manual page 735

10.16.8.8 dos-control tcpfrag
This command enables TCP Fragment Denial of Service protection. If the mode is enabled, Denial of
Service prevention is active for this type of attack. If packets ingress having IP Fragment Offset equal to
one (1), the packets will be dropped if the mode is enabled.
Syntax
dos-control tcpfrag
no dos-control tcpfrag
no -
This command disabled TCP Fragment Denial of Service protection.
Default Setting
Disabled
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
733