Fujitsu PRIMERGY BX900 User Manual page 720

Blade server systems ethernet connection blade module sb6 / sb11a / sb11 switch version

Hide thumbs Also See for PRIMERGY BX900:

Table of Contents

radius-server msgauth

This command enables the message authenticator attribute for a specified server.

radius-server msgauth <ipAddr|ipv6Addr|hostname>

<ipAddr|ipv6Addr|hostname> - is a IPv4/IPv6 address or Host name.

Default Setting

Command Mode

Global Config

radius-server primary

This command is used to configure the primary RADIUS authentication server for this RADIUS client. The

primary server is the one that is used by default for handling RADIUS requests. The remaining configured

servers are only used if the primary server cannot be reached. A maximum of three servers can be

configured on each client. Only one of these servers can be configured as the primary. If a primary server

is already configured prior to this command being executed, the server specified by the IP address

specified used in this command will become the new primary server. The IP address must match that of a

previously configured RADIUS authentication server.

radius-server primary <ipAddr|ipv6Addr|hostname>

<ipAddr|ipv6Addr|hostname> - is a IPv4/IPv6 address or Host Name.

Default Setting

Command Mode

Global Config

2011 Fujitsu Technology Solutions

Show Quick Links

Table of Contents

Primergy bx400