10.6.2.11
show displaymode
This command displays extended display settings.
Syntax
show displaymode
Default Setting
None
Command Mode
Privileged Exec
10.6.2.12
displaymode
This command is used to enable/disable extended display mode. In the extended display mode, the
displayed information will have more than 80 characters per line.
Syntax
displaymode
no displaymode
no - This command sets extended display mode to disable.
To get the better display style on extended display mode, you have to use the terminal
i
which is supported to display more than 80 characters per line.
Default Setting
Enable
Command Mode
Privileged Exec
2011 Fujitsu Technology Solutions
©
512