Fujitsu PRIMERGY BX900 User Manual page 349

Blade server systems ethernet connection blade module sb6 / sb11a / sb11 switch version

Hide thumbs Also See for PRIMERGY BX900:

Table of Contents

Stack MAC Config

Figure : Stack MAC Config

Selection Criteria

Admin Mode - Select enable or disable from the pull down menu. When you select 'enable', the

Stack MAC Persistent Timer function will be enabled.

Configurable Data

Persistent Timer(Minutes) - Set the time period in minutes before the stack MAC address changes

to that of the new stack master. The valid range is from 0 to 60.

Command Buttons

Apply - Send the updated configuration to the switch. Configuration changes take effect

immediately. These changes will not be retained across a power cycle unless a save is performed.

Stack MAC persistency timer value of 0 means that, after a master switchover, the current

stack-mac will continue to be used indefinitely.

If the entire stack reloads, it comes up with the MAC address of the current stack master as the

stack MAC address.

2011 Fujitsu Technology Solutions

Show Quick Links

Table of Contents

Primergy bx400