Fujitsu PRIMERGY BX900 User Manual page 170

9.2.14.3 Name Server Config
You can use this screen to change the configuration parameters for the domain name servers. You can
also use this screen to display the contents of the table.
Figure : DNS Relay Name Server Config
Selection Criteria
Protocol – Specify the IP version, IPv4 or IPv6.
Name Server - Specifies all the existing domain name servers along with an additional option
"Create". When the user selects "Create" another text box "IP Address" appears where the user may
enter domain name server to be configured.
Configurable Data
IP Address - Specifies the IPv4/IPv6 address of the domain name server.
Non-Configurable Data
Request - Specifies the number of DNS requests since last agent reboots.
Response - Specifies the number of DNS Server responses since last agent reboots.
Command Buttons
Apply - Sends the updated configuration to the switch. Configuration changes take effect
immediately.
Delete - Deletes the domain name server entry. Sends the updated configuration to the switch.
Configuration changes take effect immediately.
Delete All - Deletes all the domain name server entries. Sends the updated configuration to the
switch. Configuration changes take effect immediately.
Clear All Counter - Cleans all the name server counters.
2011 Fujitsu Technology Solutions
©
168