10.4.3.17
switchport native vlan
This command changes the VLAN ID per interface.
Syntax
switchport native vlan <vlanid>
no switchport native vlan <vlanid>
<vlanid> - VLAN ID (Range: 1 - 4094).
no - This command sets the VLAN ID per interface to 1.
The range of VLAN ID is 1 to 4093 for the stackable connection blade.
i
Default Setting
1
Command Mode
Interface Config
This command changes the VLAN ID for all interfaces.
Syntax
switchport native vlan all <vlanid>
<vlanid> - VLAN ID (Range: 1 - 4094).
all - All interfaces.
no - This command sets the VLAN ID for all interfaces to 1.
The range of VLAN ID is 1 to 4093 for the stackable connection blade.
i
Default Setting
1
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
404