10.4.6.1.4 show ip igmp snooping static
The user can go to the Privilege Mode to display IGMP snooping static information, use the show ip
igmp snooping static Privilege command.
Syntax
show ip igmp snooping static
Default Setting
None
Command Mode
Privilege Exec, User Mode
Display Message
VLAN: The VLAN ID used with the MAC address to fully identify packets you want L2Mcast Group.
MAC Address: The MAC address of the L2Mcast Group in the format 01:00:5E:xx:xx:xx.
Port: List the ports you want included into L2Mcast Group.
State: The active interface number belongs to this Multicast Group.
10.4.6.2
Configuration Commands
10.4.6.2.1 ip igmp snooping
This command enables IGMP Snooping on the system. The default value is disabled.
Syntax
ip igmp snooping
no igmp snooping
no - This command disables IGMP Snooping on the system.
Default Setting
Disabled
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
436