Fujitsu PRIMERGY BX900 User Manual page 742

10.17.2.5 match class-map
This command adds to the specified class definition the set of match conditions defined for another class.
Syntax
match class-map <refclassname>
<refclassname> is the name of an existing DiffServ class whose match conditions are being
referenced by the specified class definition.
Note: There is no [not] option for this match command.
Default
None
Command Mode
Class-Map Config
Restrictions The class types of both <classname> and <refclassname> must be identical (that is, any
vs. any, or all vs. all). A class type of acl is not supported by this command. Cannot specify
<refclassname> the same as <classname> (that is, self-referencing of class name not allowed). At most
one other class may be referenced by a class. Any attempt to delete the <refclassname> class while still
referenced by any <classname> shall fail.
The combined match criteria of <classname> and <refclassname> must be an allowed combination
based on the class type. Any subsequent changes to the <refclassname> class match criteria must
maintain this validity, or the change attempt shall fail. The total number of class rules formed by the
complete reference class chain (includes both predecessor and successor classes) must not exceed a
platform-specific maximum. In some cases, each removal of a refclass rule reduces the maximum number
of available rules in the class definition by one.
2011 Fujitsu Technology Solutions
©
740