10.15.1.3
show sntp server
This command displays configured SNTP servers and SNTP server settings.
Syntax
show sntp server
Default Setting
None
Command Mode
Privileged Exec
Display Message
Server IP Address: IP address of configured SNTP Server
Server Type: Address Type of Server.
Server Stratum: Claimed stratum of the server for the last received valid packet.
Server Reference ID: Reference clock identifier of the server for the last received valid packet.
Server Mode: SNTP Server mode.
Server Max Entries: Total number of SNTP Servers allowed.
Server Current Entries: Total number of SNTP configured.
For each configured server:
IP Address: IP address of configured SNTP Server.
Address Type: Address Type of configured SNTP server.
Priority: IP priority type of the configured server.
Version: SNTP Version number of the server. The protocol version used to query the server in
unicast mode.
Port: Server Port Number
Last Attempt Time: Last server attempt time for the specified server.
Last Update Status: Last server attempt status for the server.
Total Unicast Requests: Number of requests to the server.
Failed Unicast Requests: Number of failed requests from server.
2011 Fujitsu Technology Solutions
©
690