10.20.1.2
show switch stack port
This command displays information of the stack port of stack members in the stack system. This command
is only available for Ethernet Connection Blade with stacking feature.
Syntax
show switch stack-port
Default Setting
None
Command Mode
Privileged Exec
Display Message
Unit: Displays the unit.
Interface: Displays the stackable interfaces on the given unit.
Configured Stack Mode: Displays the configured mode for the given interface. Currently, only N/A is
displayed.
Running Stack Mode: Displays the run-time mode of the stackable interface.
Link Status: Displays the link status (UP/DOWN) of the stacking port.
Link Speed (Gb/s): Displays the maximum speed of the stacking port.
10.20.1.3
show stack port counter statistic
This command displays statistic of the stacking port. This command is only available for Ethernet
Connection Blade with stacking feature.
Syntax
show switch stack-port counters [detailed]
Default Setting
None
Command Mode
Privileged Exec
Display Message
Unit: Displays the unit.
Interface: Displays the stackable interfaces on the given unit.
Transmit and Receive statistics
Data Rate (Mb/s): Displays the approximate rate on the stacking port.
Error Rate (Errors/s): Displays an approximate error rate on the stack port.
Total Errors: Displays the total number of errors since boot. The counter may wrap.
2011 Fujitsu Technology Solutions
©
793