Fujitsu PRIMERGY BX900 User Manual page 346

9.5.2.6 Interface Queue Status
Figure : Class of Service Interface Queue Status
Selection Criteria
Slot/Port - Specifies all CoS configurable interfaces. The option "Global" represents the most recent
global configuration settings. These may be overridden on a per-interface basis.
Non-Configurable Data
Queue ID - Specifies the queue ID.
Minimum Bandwidth - Specifies the minimum guaranteed bandwidth allotted to this queue. The
value 0 means no guaranteed minimum. Sum of individual Minimum Bandwidth values for all queues
in the selected interface cannot exceed defined maximum (100).
Scheduler Type - Specifies the type of scheduling used for this queue. Scheduler Type can only be
one of the following:
strict
weighted
Queue Management Type - Queue depth management technique used for queues on this
interface. This is only used if device supports independent settings per-queue. Queue Management
Type can only be one of the following:
taildrop
2011 Fujitsu Technology Solutions
©
344