10.6.7.4
snmpinform mode
This command activates or deactivates an SNMP inform. Enabled inform receivers are active (able to
receive inform). Disabled inform receivers are inactive (not able to receive inform).
Syntax
snmpinform mode <name> <ipaddr | ipv6Addr >
no snmpinform mode <name> <ipaddr | ipv6Addr >
<name> - SNMP inform name.
<ipadd | ipv6Addr > - an IPv4 or IPv6 address.
no - This command deactivates an SNMP inform. Inform receivers are inactive (not able to receive
inform).
Default Setting
None
Command Mode
Global Config
10.6.7.5
snmpinform version
This command change an SNMP inform version.
Syntax
snmpinform version <name> <ipaddr | ipv6Addr> <snmpv2| snmpv3>
<name> - SNMP inform name.
<ipadd> - an IPv4 or IPv6 address.
snmpv2 - Use SNMP v2 to send inform.
snmpv3 - Use SNMP v3 to send inform.
Default Setting
None
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
542