Show Ip Interface - Cisco MDS 9124 - Fabric Switch Reference

show ip interface

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show ip interface
To display IP interface status and configuration information, use the show ip interface command.
Syntax Description cpp module-number
gigabitethernet slot/port
mgmt
port-channel number
vsan vsan-id
Defaults None.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines None.
Examples The following example displays IP interface status and configuration information.
switch# show ip interface
GigabitEthernet1/1 is up
Internet address is 10.10.10.1/24
Broadcast address is 255.255.255.255
GigabitEthernet1/2 is up
Internet address is 10.10.60.1/24
Broadcast address is 255.255.255.255
GigabitEthernet2/2 is up
Internet address is 10.10.20.1/24
Broadcast address is 255.255.255.255
mgmt0 is up
Internet address is 172.22.31.110/24
Broadcast address is 255.255.255.255
Cisco MDS 9000 Family Command Reference
22-156
show ip interface [cpp module-number | gigabitethernet slot/port | mgmt | port-channel number
| vsan vsan-id]
Modification
This command was introduced.
Specifies the virtualization IP over Fibre Channel (IPFC) interface by
CPP module number. The range is 1 to 6.
Specifies the Gigabit Ethernet interface by slot and port number. The
range is 1 to 6.
Specifies the management interface.
Specifies the PortChannel interface. The range is 1 to 256.
Specifies the IPFC VSAN interface by VSAN ID. The range is 1 to 4093.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x