Show Ips Arp - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show ips arp

To display the IP storage ARP cache information, use the show ips arp command.
Syntax Description
interface gigabitethernet slot/port
Defaults None.
Command Modes EXEC mode.
Command History Release
1.1(1)
Usage Guidelines Use the show ips arp interface gigabitethernet command to display the ARP cache on the Gigabit
Ethernet interfaces. This command takes the main Ethernet interface and as a parameter and returns the
ARP cache for that interface.
Examples The following example displays ARP caches in the specified interface.
switch# show ips arp interface gigabitethernet 4/1
Protocol
Protocol
Internet
Internet
Internet
Internet
Internet
...
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show ips arp interface gigabitethernet slot/port
Modification
This command was introduced.
Address
Address
172.22.91.1
172.22.91.2
172.22.91.17
172.22.91.18
172.22.91.30
Specifies a Gigabit Ethernet interface by the slot and port.
Age (min) Hardware Addr
Age (min) Hardware Addr
2 - 00:00:0c:07:ac:01
0 - 00:02:7e:6b:a8:08
0 - 00:e0:81:20:45:f5
0 - 00:e0:81:05:f7:64
0 - 00:e0:18:2e:9d:19
Cisco MDS 9000 Family Command Reference
Type Interface
Type Interface
ARPA GigabitEthernet4/4
ARPA GigabitEthernet4/4
ARPA GigabitEthernet4/4
ARPA GigabitEthernet4/4
ARPA GigabitEthernet4/4
show ips arp
22-161