Enable Mode; Table 89 Command Summary: Enable Mode - ZyXEL Communications GS-2724 User Manual

Table 88 Command Summary: User Mode (continued)
COMMAND
enable
show ip
hardware-monitor <C|F>
system-information
ping <IP|host-name>
<IP|host-name> [vlan
<vlan-id>]
[size <0-1472>]
[-t]
help
traceroute <ip|host-name>
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
help
ssh <1|2> <[user@]dest-ip>

38.11.2 Enable Mode

The following table describes the commands available for Enable mode.

Table 89 Command Summary: Enable Mode

COMMAND
baudrate
<1|2|3|4|5>
boot config <index>
configure
copy running-config
tftp <ip>
<remote-file>
running-config
interface port-
channel <port>
<port-list>
GS-2724 User's Guide
Chapter 38 Introducing Commands
DESCRIPTION
Accesses Enable (or privileged) mode. See
Section 38.11.2 on page 237.
Displays IP related information.
Displays current hardware monitor information with
the specified temperature unit (Celsius C or
Fahrenheit F).
Displays general system information.
Sends Ping request to an Ethernet device.
Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
Displays command help information.
Determines the path a packet takes to a device.
Determines the path a packet takes to a device in a
VLAN.
Displays command help information.
Connects to an SSH server with the specified SSH
version.
DESCRIPTION
Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5
(115200).
Restarts the system with the
specified configuration file.
Accesses Configuration mode.
See Section 38.11.3 on page
Backs up running configuration to
the specified TFTP server with the
specified file name.
Clones (copies) the attributes
from the specified port to other
ports.
PRIVILEG
E
0
0
0
0
0
0
0
0
0
0
0
PRIVILEG
E
13
13
13
242.
13
13
237