Vlan1Q Vlan List Command; Figure 23-14 Vlan1Q Svlan List Command; Figure 23-15 Vlan1Q Svlan List Command - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

Syntax:
ras> sys sw vlan1q svlan list
This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.
An example is shown next.
For the section of the last column, "-" is a port set to normal, "x" is a forbidden port and "F" is a fixed port.
AdCtl
For the section of the last column, "T" is a tagged port, "U" is an untagged port.
TagCtl
ras> sys sw vlan1q svlan list
802.1Q VLAN Static Entry:
idx. Name
---- ------------ ---- -------- ------------------------
0

23.8 VLAN1Q VLAN List Command

Syntax:
ras> sys sw vlan1q vlan list <all|VID|start_VID|end_VID>
where
<all|VID|start
_VID|end_VID>=
This command shows the current IEEE 802.1Q Tagged VLAN table or a specific part of it.
An example is shown next.
For the section of the last column, "E" is an egress port for this VLAN, "-" is not an egress port for
EgressPort
this VLAN.
The section of the last column displays "-" for a tagged port and "U" for an untagged port.
UntaggedPort
ras> sys sw vlan1q vlan list all
No.
------ ---- -----------
1)
23.8.1 VLAN Status Command
Syntax:
IEEE 802.1Q Tagged VLAN
VID Active
1 1 active

Figure 23-14 VLAN1Q SVLAN List Command

Specify either all of the VLAN entries (
range of VLAN IDs starting from a certain VID (
VLAN Ids ending at a specific VID (
VID ElapsedTime Status
------
1 51:30:02 Static

Figure 23-15 VLAN1Q SVLAN List Command

AdCtl / TagCtl
------------------------FFFF
TTTTTTTTTTTTTTTTTTTTTTTTUUUU
EgressPort/UntaggedPort
--------------------------------
----E|EEE--|-----|-EEEE|EEEEE|EEE
-----|-----|-----|-----|----U|UUU
Dimension ES-3024 Ethernet Switch
), a single VLAN ID (
all
start_VID
).
end_VID
) or a
VID
) or a range of
23-9