Table of Contents
Advertisement
February 2008
Changing pcAnywhere caller passwords
Introduction
With pcAnywhere, you can perform advanced administrative tasks on the
server from a remote PC. You can control the server as though you were
directly connected to the server.
pcAnywhere is installed and configured on the server at the factory. One
licensed copy of pcAnywhere is provided for the server on the CallPilot
Application CD-ROM.
To install pcAnywhere on another PC, you must purchase a separate license.
For instructions on how to install and configure pcAnywhere on another PC,
refer to the Administrator's Guide.
To simplify the remote logon process, Nortel recommends that you match
the pcAnywhere caller password for CallPilotDist with the Nortel user
account password for NGenDist. Therefore, Nortel recommends that you
change the pcAnywhere caller CallPilotDist password and the Windows
2003 NGenDist account password at the same time.
To change pcAnywhere caller passwords
1 Stop the pcAnywhere session, if one is running.
2 Click Start
Result: The pcAnywhere Manager opens.
3 Right-click the CallPilot Support host, and then select Properties from
the pop-up menu.
Result: The pcAnywhere Host Properties: CallPilot Support dialog box
appears.
T1/SMDI and CallPilot Server Configuration
➝
➝
Programs
Configuring the CallPilot server software
Symantec pcAnywhere.
113
Advertisement
Table of Contents
