Getting Started With Starter Getting Started, 11/2017, 6Sl3097-4Ag00-0Bp5 - Siemens Sinamics S120 Getting Started

Notation
The following notation and abbreviations are used in this documentation:
Notation for faults and alarms (examples):
• F12345
• A67890
• C23456
Notation for parameters (examples):
• p0918
• r1024
• p1070[1]
• p2098[1].3
• p0099[0...3]
• r0945[2](3)
• p0795.4
This documentation is aimed at beginners who want to find out more about the
SINAMICS S120 drive system. The document offers a brief guide to commissioning a
sample project with a simple SINAMICS S120 drive train (CU320-2 PN). By following the
instructions in this document, a beginner will need only a few minutes to engineer and
configure the sample project and start up the motor.
Getting Started with STARTER
Getting Started, 11/2017, 6SL3097-4AG00-0BP5
Fault 12345
Alarm 67890
Safety message
Adjustable parameter 918
Display parameter 1024
Adjustable parameter 1070, index 1
Adjustable parameter 2098, index 1 bit 3
Adjustable parameter 99, indices 0 to 3
Display parameter 945, index 2 of drive object 3
Adjustable parameter 795, bit 4
Preface
11