130
To connect a color monitor
Use this table to attach the cables to the appropriate
output signals on your color monitor.
Color Monitor Configuration
Cable Label
GREEN
VSYNC
HSYNC
To connect the monitors to the board
1. Attach the D-shell connector to the Md4/PCI board,
securing the connection with the screws on the
connector.
2. Attach each output cable to the appropriate BNC
terminal on your monitor.
Refer to your monitor documentation for more infor-
mation about the connector assignments.
3. Repeat step 2 for each monitor to which you want to
connect the Md4/PCI board.
Output Signal
Green
RED
Red
BLUE
Blue
Vertical sync
Horizontal sync
Chapter 4