Using The Dome Tab To Change Display Properties - Planar DOME Md4/PCI Installation Manual

Installing the Md4/PCI Board in a PC

Using the DOME tab to change display properties

You can change these display properties with the DOME
tab after the display is attached to the Windows 2000
desktop.
To complete this task...
Change the resolution and refresh rate
Select palette options
Set monitor preferences
Set driver options
Set custom syncs
To change display properties
1. Log onto Windows 2000 as administrator.
2. Right-click the desktop, and select Properties ->
Settings tab.
The Settings tab appears.
3. Select Default Monitor on DOME Md2/PCI, Md4/PCI,
Md5/PCI, or Md8/PCI from the Display box.
Make sure the Extend my Windows desktop onto
this monitor box is checked.
4. Click Advanced -> DOME tab to select a resolution and
refresh rate.
The DOME tab appears.
Changing Display Properties
67
See page...
68
69
69
69
73