Planar DOME Md4/PCI Installation Manual page 153

Md4/PCI Board Resolutions and Refresh Rates
1. Open the text sync (
directory. The
Md4PCI.vid
Change individual sync parameters in the text sync file
or add new individual syncs at the end of the file to
create a new mode.
Make sure there are no empty lines at the end of the
.vid
2. Save the text sync file.
3. Open a DOS window.
4. Change directory to
5. Run the
build the corresponding
The program asks you to enter the system windows
directory.
6. Type
directory.
The program asks if you want to back up your existing
.cfg
7. Type
The program rebuilds the
new syncs. It puts the new
ate directory.
It backs up the existing
the
where
your system windows directory.
8. Reboot your computer for the new syncs to take effect.
.vid
file for the Md4/PCI board is
.vid
.
file.
C:\dome\tools
program from a DOS window to
mdconfig
or your corresponding windows
C:\winnt
file.
.
y
.cfg
windows dir\system32\drivers
is the directory you specified as
windows dir
) file from the
C:\dome\tools
.
file.
.cfg
file according to the
.cfg
file into the appropri-
.cfg
file as a
.cfg.bak
directory,
137
file in