To Enable The Sister Display - Planar DOME Md4/PCI Installation Manual

Installing the Md4/PCI Board in a PC
7. Select Extend my Windows desktop to this monitor
and click Apply.
The Display Properties dialog box appears with this
message:
Windows will now apply your new desktop settings.
The Original desktop is restored if the settings are not
applied correctly.
8. Click OK to accept the new settings or Cancel to revert
to the original settings.
Now that you've installed the driver for one display,
follow the instructions below to install the driver for
the sister display.

To enable the sister display

Reinstall the driver for each sister display that you want
to enable.
1. Double-click the Add/Remove Hardware icon in the
Microsoft Control Panel.
The Add/Remove Hardware Wizard appears.
2. Click Next.
The Choose a Hardware Task appears.
3. Select Add/Troubleshoot a device and click Next.
The Choose a Hardware Device dialog box appears.
4. Select Add a new device, and click Next.
The Find New Hardware dialog box appears.
5. Select No, I want to select the hardware from a list and
click Next.
The Hardware Type dialog box appears.
63