Planar DOME Md4/PCI Installation Manual page 58

42
To use the DOME tab online help
The Windows NT driver (version 4.4.0 or later) provides
online, context-sensitive help for the DOME tab. You can
access the help in either of two ways:
• Click the question mark (?) button on the title bar, and
then click the area of the DOME tab with which you need
assistance.
• Move the cursor to the area with which you need assis-
tance and then press <F1>.
To change resolution and refresh rate
Valid options for resolution and refresh rate are listed in
the Resolution and Refresh rate section of the DOME tab.
Highlight the desired options.
To set the screen configuration
Each Md4/PCI board can support either one or two
screens. Highlight the desired number and configuration.
To set monitor preferences
In the Monitor Preferences section of the DOME tab, you
can select these options:
• Sync on Green
• Composite Sync
• Pedestal
If your monitor is set for these options, you should select
them here. Refer to your monitor manufacturer's recom-
mendations for more information.
Chapter 2