Table of Contents
Advertisement
106
Configuring the Windowing Environment
After you have set the monitor mode, you can configure
your system to run either the OpenWindows or CDE
windowing environment.
To support color with the Md4/PCI board, you must use
only one head per board. If you are using two heads per
board, both heads must be grayscale, and both must have
the same resolution.
To run OpenWindows
Launch the OpenWindows server as follows:
For a one-headed system, type:
openwin -dev /dev/md4pci0.0
For a two-headed system, type:
openwin -dev /dev/md4pci0.0 -dev \
Each screen has a name of the form:
/dev/md4pciy.z
where:
= board instance
y
z= head number (0 for first head, 1 for second head)
Board instances are assigned by the system.
For more information on
OpenWindows documentation.
/dev/md4pci0.1
openwin
Chapter 3
, refer to the Sun
Advertisement
Table of Contents
Troubleshooting
